Rayzoon Technologies LLC Forum Index Rayzoon Technologies LLC
Official Online Community & Support
 
Rayzoon Web Site

 FAQFAQ   SearchSearch   http://rayzoon.com/v-web/bulletin/bb/lm.phpMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

sound is diffrent when switch from 44.1 to 96 khz

 
Post new topic   Reply to topic    Rayzoon Technologies LLC Forum Index -> Jamstix - Support
View previous topic :: View next topic  
Author Message
acdc_2000
Jam Meister
Jam Meister


Joined: 23 Nov 2014
Posts: 55

PostPosted: Sun Jun 14, 2020 8:44 am    Post subject: sound is diffrent when switch from 44.1 to 96 khz Reply with quote

this can see in the rock default kit.

it work ok when switch to 96 khz and lthen load rock default kit. then it sound correct
but it did not work ok when the kit is not load and only in studio one the sample rate is change from 44.1 khz to 96 khz

so it seem jamstix did not know for filter or compressor times that sample rate have change. can this fix or is this problem in studio one ?
Back to top
View user's profile Send private message
Ralph [RZ]
Site Admin
Site Admin


Joined: 02 Jan 2008
Posts: 13332

PostPosted: Sun Jun 14, 2020 12:08 pm    Post subject: Reply with quote

Next time this happens, please use 'Email Tech Support' to send me the logs.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com
Back to top
View user's profile Send private message Send e-mail
acdc_2000
Jam Meister
Jam Meister


Joined: 23 Nov 2014
Posts: 55

PostPosted: Mon Jun 15, 2020 9:22 am    Post subject: Reply with quote

I test now with reaper too. same problem. to hear. please create a song and add jamstix with DAW rate of 44.1 khz. loadn as kit rock standard and make a JS song. then choose reaper render. render 1 file with 44.1 khz and 1 file with 96 khz. the drums sound much diffrent. it seem it change tuning too

can you heaer not the problem ?
Back to top
View user's profile Send private message
Ralph [RZ]
Site Admin
Site Admin


Joined: 02 Jan 2008
Posts: 13332

PostPosted: Thu Jun 25, 2020 4:00 pm    Post subject: Reply with quote

I have not had a chance yet to look into this but it sounds like the sample rate change is not seen properly by Jamstix in REAPER's render mode. As a work-around, render to 44.1kHz first and then re-render the resulting file to 96kHz if that is what you need.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com
Back to top
View user's profile Send private message Send e-mail
acdc_2000
Jam Meister
Jam Meister


Joined: 23 Nov 2014
Posts: 55

PostPosted: Fri Jun 26, 2020 2:47 am    Post subject: Reply with quote

The problem happen too when i load a song with 44.1 khz sample rate and later change in reaper preferences to sample rate diffrent to that(96 khz hear extreme).

it seem jamstix did not notice the sample rate change. now i know this is easy to workaround. (never change sample rate later in jamstix song) but before i did not notice wy this happen i wonder wy jamstix sound so much diffrent. i have on some songs 44 khz some 48 khz dan i switch sometimes between that, because on high cpu load sometimes 44 khz work better sometimes 48 khz. depend on plugins. on this it is only a little. very much can hear when switch between 96 or 44 khz.

so i report problem in forum that other notice this too. when know that sampoe rate should not change, this is not a important problem, but if you can fix it in future is nice.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Rayzoon Technologies LLC Forum Index -> Jamstix - Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group