Rayzoon Technologies LLC

Ian Forster · Junior Jammer Joined: 14 May 2005 Posts: 15

Discovered a problem on my set up when using Jamstix in C6.

Load up Jamstix with the Standard kit and no matter what the pan settings are for any kit element everything just sounds in the left channel.

It works fine in Cubase 5 and FL Studio.

Not sure if its a setting somewherein Cubase or Jamstix Ive messed up. If someone has C6 and JS3 if they could test it see if it works properly on their system and let me know I would be grateful.

edit: It worse than that..no matter what output is set for each kit element it still send the sounds to output 2 and only to the left channel

Thanks

Ian

studio64 · Posted: Mon Apr 25, 2011 8:21 am Post subject:

Hi Ian

Well, I found similar in that same situation. I've not looked into the problem, all I do is change the snare from 2 to 1 output, and all seems acceptable (but not nesessary right)

Ralph will perhaps chime in with the reason why this is the case.

regards
_________________
john-studio64
Intel i7-2600 3.4 16g Ram
Cubase6

Ian Forster · Junior Jammer Joined: 14 May 2005 Posts: 15

Thanks for confirming its not just me.

I have the options set to 8 stereo outputs and when downmix is activated, the only output that is stereo is 1, 2 to 8 are mono on the left channel.

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

It sounds like something is incorrectly set-up on the audio tracks for Jamstix in Cubase.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

Ian Forster · Junior Jammer Joined: 14 May 2005 Posts: 15

studio64 · Posted: Tue Apr 26, 2011 12:10 am Post subject:

Hi

when you think about it, if it is OK in Cubase 5, but not Cubase 6, it must be something changed in C6.

I will investigate

regards
_________________
john-studio64
Intel i7-2600 3.4 16g Ram
Cubase6

Ian Forster · Junior Jammer Joined: 14 May 2005 Posts: 15

Agree completely. I cannot see any settings in C6 which would cause the problem, just add an instrument track with Jamstix and away you go.

Must be a nightmare for developers trying to keep everything working in hosts that move the goal posts all the time.

Ian

studio64 · Posted: Tue Apr 26, 2011 3:57 am Post subject:

Hi Ian

I have just had a quick play with JS3 in C6.

Snare is left only on default settings.
If I activate all JS3 outputs from the VST instrument rack panel, JS3 plays as expected ie snare sounds middle, although none of the newly activated outputs are being used.

Summing up, still baffled.
_________________
john-studio64
Intel i7-2600 3.4 16g Ram
Cubase6

Ian Forster · Junior Jammer Joined: 14 May 2005 Posts: 15

Ressurecting this ancient thread. I had given up on resolving this problem I had. Thought it was a longshot but updated to 3.5 see if it made any difference.

The boys only gone and fixed it, dont know what you did Ralph but its all working fine now.

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

Glad it's fixed!

Jamstix 3.5 is a major rewrite of the host interface so that explains why this got fixed 'accidentally'.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com