Rayzoon Technologies LLC

[Ralph [RZ]]

Please go to your personal download page and download under 'UPDATE'.

Jamstix 3.6.0 Final

• added process priority management to avoid CPU usage issues under 96kHz with high-load projects
  
  Jamstix 3.6.0 Beta RC1
  
• fixed VST automation issues
  
• added Jamstix AAX and audioM8 AAX to installer
  
• plugin server closes after 1 minute if idle
  
• fixed some memory usage issues
  
• various minor fixes
  
  Jamstix 3.6.0 Beta 32
  
• improved MIDI import dialog
  
• added option to adjust font size on QHD+ displays
  
  Jamstix 3.6.0 Beta 30
  
• added 'MIDI OUTPUT ONLY' option to 'Add To Kit' context menu
  
• fixed kit context menu 'Set MIDI OUTPUT Only' for kit piece adjusting main articulation only
  
• fixed Jamcussion virtual kit display problems when using MIDI OUTPUT ONLY
  
• Jamcussion kit load dialog now excludes 'Empty' kits and shows contents of 'Jamcussion' folder directly
  
• safety data revision save on exit is now only stored if kit is non-empty
  
• various minor fixes
  
  Jamstix 3.6.0 Beta 29
  
• fixed wizard song list logic when using subfolders
  
• WIN-64: fixed audioM8 interface issue
  
• OSX: server window no longer has a system menu
  
• OSX: fixed sandboxing issue under Garageband X/Logic Pro X
  
• OSX: the folder "~/Documents/Jamstix3" is now located under "~/Music/Jamstix3"
  
  Jamstix 3.6.0 Beta 28
  
• fixed default song wizard reverting to default later unless style is changed
  
• OSX: fixed cursor/position logic issue on sliders
  
• added link to PDF manuals to song menu
  
• various minor fixes
  
  Jamstix 3.6.0 Beta 27
  
• improved GUI size switch logic
  
• fixed fill controller mappings not loading/saving with map file
  
• fixed incorrect hints on some jamming options
  
• fixed status line not showing values when adjusting velocity or HH openness via mousewheel in bar editor
  
• fixed assigned velocities when using 'Add Snare Roll: quiet-loud-quiet'
  
• 'Add Cymbal Wash' now uses Crash #2 instead of Crash #4
  
  Jamstix 3.6.0 Beta 26
  
• improved audio jam behavior and response control
  
• audio jam settings are now saved globally
  
• fixed accent frequency selection display update logic
  
• AUTO SAVE now defaults to new mode EXIT, which automatically stores a "LAST" revision point on exit
  
• revisions filter is no longer affected by song name changes
  
  Jamstix 3.6.0 Beta 23
  
• fixed Cubase and Studio One not loading song data from older Jamstix versions
  
• fixed bar editor and timeline not refreshing on GROOVE, ACCENT, FILL button clicks
  
  Jamstix 3.6.0 Beta 22
  
• fixed ASIO spikes
  
• fixed bar lock button not responding
  
  Jamstix 3.6.0 Beta 21
  
• fixed host data load issues
  
  Jamstix 3.6.0 Beta 20
  
• fixed virtual kit alignment issues with ePak kits
  
• fixed intermittent 'core access error' when loading Jamstix project with audio plugin server closed
  
• audio plugin server is now hidden from taskbar and window list
  
• added Expand/Collapse buttons to kit load dialog
  
• hitting ENTER on part editing now properly updates spin box changes
  
• various minor fixes
  

Changes From Jamstix 3.6.0 Beta 17

• fixed GUI issues on systems with custom DPI settings
  

Changes From Jamstix 3.6.0 Beta 14

• fixed I/O Error 103 issue
  
• fixed framing issues in Compact UI mode
  
• fixed MIDI files being locked after import
  
• fixed GUI 'tearing' when being moved or obscured
  
• pattern import scan is now limited to 3 seconds if 'Include Subfolders' is checked
  
• pattern import 'Include Subfolders' setting is now retained
  
• fixed error in hihat foot option of the 'Tom Groove' brain element
  
• various minor fixes
  

Changes From Jamstix 3.6.0 Beta 13

• fixed UIERROR under certain circumstances
  
• fixed New Part - Before Current Part not working correctly
  
• fixed decompression errors under certain circumstances
  
• various minor fixes
  

Changes From Jamstix 3.6.0 Beta 12

• fixed bar menu back logic
  
• fixed brain elements not being controllable under certain circumstances
  
• fixed brain scroll setting being retained when switching brain aspect
  
• Cubase: mousewheel and keyboard intercepts now work properly
  
• various minor fixes
  

Changes From Jamstix 3.6.0 Beta 11

• GUI is now compatible with Cubase Stay-On-Top mode
  
• added updated audioM8 plugin
  
• fixed VST automation issues
  
• fixed 'Install Pak' not working
  
• fixed rudiment frequency in 'Carmine' model being set incorrectly
  
• fixed bar/beat display when playing before song zero offset point
  

Changes From Jamstix 3.6.0 Beta 10

• improved GUI load time
  
• fixed virtual kit images being confused when using more than one Jamstix instance
  
• added 'Bounce' option if audio rendering issues are encountered during bounce, mixdown or freeze in the host
  

Changes From Jamstix 3.5.1 Beta 8

• redesigned architecture for commonality with OSX version and future product interactivity (i.e JamBassist)
  
• improved import dialog for groove importer and MIDI import menu items
  
• implemented MIDI drag-&-drop to host
  CTRL-Drag song name->song export
  CTRL-Drag part name->part export
  CTRL-Drag bar icon->bar export
  
• MIDI files can be dragged from Explorer onto free brain space to create a groove importer for the file
  
• added 400 grooves from Jamstix 1 as 'Jamstix 1' styles
  
• added 201 fills from Jamstix 1 to 'fills' folder for use with 'Load Fill' (bar menu)
  
• added options to limb menu to copy/paste limbs
  
• added 'Add Groove To Style' to bar menu as fast way to add hand-edited groove elements to an existing style
  
• added 'Set All To MIDI Output Only' to kit context menu
  
• added 'Remove All Offset Assignments' to kit context menu
  
• added option to change PC numbers in liveloop mode via variable LiveloopsPatchOffset
  
• added BFD3 kits and key maps
  
• added GM MIDI ONLY kits
  
• holding CTRL while clicking the bar editor trash can causes locked notes to also be deleted
  
• MIDI input is now passed-through to output to support chained plugins
  
• fixed errors when song looping and liveloops are both enabled
  
• fixed issue with limited layers loading after previewing a kit
  
• fixed issue with virtual kit layout when the snare is removed
  
• fixed any remaining issues with host close/unload crashes
  
• removed RTAS option, AAX option coming soon
  
• removed warning message when loading projects with Jamstix in drum module mode
  

Changes From Jamstix 3.5.1 Beta 3

• fixed liveloop program change requests not working
  
• when in liveloop auto-advance mode, 'Big Time' window will display appropriate message
  
• fixed certain host not closing correctly under certain circumstances
  
• improved save times for projects with large number of parts
  

Changes From Jamstix 3.5.1 Beta 2

• fixed 'revisions' folder not being created
  
• Fill Generator: KICK->CYMBALS are now produced over any existing kick note, not just those created by the SINGLE kick setting
  
• Fill Generator: added KICK->PRIO control to adjust priority of KICK->CYMBALS notes produced
  
• new INI parameter 'MIDICC_Offset' sets controller number to trigger song offsetting
  
• new INI parameter 'MIDICC_OffsetZero' sets controller number to reset song offset
  
• song builder can now use Jamstix 1 RDM kits
  
• fixed orange label in groove importer load dialog not updating
  
• double-clicking bar editor to create a note now also selects it
  
• moving the mouse through the 'Change Sound' sub-menus in the bar editor now audits the sounds
  
• fixed 'Add Part->Ending' placing new part in the wrong place
  
• various minor fixes
  

Changes From Jamstix 3.5.1 Beta 1

• fixed dialogs and menu position on multi-monitor setups
  
• fixed AlwaysSync INI option and added code to suspend synching when user selects a different bar or part until host plays again
  
• added options to song menu to set and reset a song offset (useful for projects with multiple linear takes)
  
• resets hihat opening override when host starts playing
  

Changes From Jamstix 3.5.0

• fixed sub-level display in kit tree view
  
• RDM kits (Jamstix 1) are now supported again in 'Load Kit' dialog
  added mixer menu
  
• song sheet now supports 'double-click->Change Style' and 'double-click->Change Player' in their respective modes
  
• fixed changing position via timeline slider button clicks
  
• 'Clear Song' now properly resets the brain display
  
• fixed limb menu not working in Jamcussion mode
  
• added kit menu option 'No MIDI Output For Internal Sounds' (useful when combining internal sounds with 3rd party plugins)
  
• various minor fixes
  

_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

[studio64]

Hi Ralph

I have replaced those files from the last update.

I load JS3.5.1(x64) in cubase 6, all apears ok, but I find Cubase has locked up for 1 or 2 minutes.

I can play the drums with the mouse ok, but Cubase will not run for a time.

Also, with my two monitor set up,wih JS 3.5 on RH monitor, the load song/save song etc menu, appears outside of JS on my LH monitor.
Not a problem, but different from earlier versions.(this also happened in JS350)

Regards and a happy new year to you.

John Heath
_________________
john-studio64
Intel i7-2600 3.4 16g Ram
Cubase6

[studio64]

A quick update on my post.

I have just noticed that, the freezing only happens the first time I run Cubase in a session.
If I start a new project in the same computer session, JS3.5.1 loads and plays instantly.

regards

John H
_________________
john-studio64
Intel i7-2600 3.4 16g Ram
Cubase6

[keys_reaper]

Hi,
It's my first time upgrading...
I could only find js3sl32.rtxc and js3sl64.rtxc in the download file, so I've copied those to the Jamstix3 folder.

jamstix3.dll (located in my vst plugins folder) was unchanged?

Thanks,
keys.

oh, btw, JS 3.5 doesent seem to create a revisions folder in my docs, V3.5.0 and V3.5.1beta gives a 'file not found' error dialog box on restore point save and v3.5.1beta crashes with a windows exception error if you then click on the song menu dropdown. V3.5.0 didnt crash, just error dialog.

winXp sp3 32bit in reaper V4.32rc1

[jazzmandan]

You must have Jamstix 3.5.0 installed for this Beta to work.

Make a backup copy of these files in your main Jamstix 3 folder:
js3sl32.rtxc
js3sl64.rtxc
Copy the RTXC files from this archive to your main Jamstix 3 folder, overwriting your current files.

--------------------
At first I thought I would not need the js3sl32.rtxc file since I am on Reaper x64 and the file was not currently in my JS folder. That was a mistake as all hell broke loose. So I followed the instructions as told.

Looks good. I now see the Jamcussion Limbs in the Song tab, I thought something was wrong before.
fixed limb menu not working in Jamcussion mode
hehe..

[jazzmandan]

Spoke too soon, Got a nasty crash in Reaper 64 with new beta. Error messages filled the screen...Had to shut all down. Ralph I know you generally like to get a .log file, but I can't seem to find one to send.

OK, just sent the crash log.

[Ralph [RZ]]

The log was clean and probably not from the crash. Do you remember the error messages?
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

[jazzmandan]

I only remember it was the same message, but it quickly repeated on the screen about 20+times like it was in a loop, till my screen almost filled with it (like the old windows solitarire game when you won at the end) cascading error message.
I will try to repeat it tonight.

[craig_glenn]

installed 3.5.1....lovely! running smoothly...sent you a mail Ralph.

[jazzmandan]

[studio64]

Hi Ralph

JS 3.5.1 Beta2 (64)

If I select a folder in the left pane, to import JS1 rhythms,
I imagine it should show the folder in orange in the top RH corner of that window(which it did when I first tried it)
Now when I try to import JS1 rhythms, selecting the correct folder does not work.
The orange text does not change to the correct folder.

MY MISTAKE , I HAD Groove import selected in JS3.5 instead of Rhythm
regards

John Heath
_________________
john-studio64
Intel i7-2600 3.4 16g Ram
Cubase6

[R Green]

Hi Ralph. I am having trouble with the song wizard. If I select a JS1 kit it does not load and I get an empty kit window after pressing create song. If I do it a few times I can end up with the words Kit and JC Kit crossed out in the song wizard.

[Ralph [RZ]]

Confirmed, we'll get that fixed.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

[Bojo_]

I have lot of troubles loading kits. Maybe those addressed are in the update?

Kits are not loading, no error message. Just a black kit-window or if there's a kit already loaded, nothing happens.

Sometimes I get this: " Cannot assign a TGUIForm to TImage".

The worst problem is that I can't load certain sounds at all (for example right clicking kit pieces), such as "brush".

I use Presonus Studio One 2 Pro on windows 7.

[sonicviz]

Jamstix keeps crashing Live. Seems to be GUI related, as it always crashes either trying to open JS plugin or attempting to open a menu in it.
Sometimes it works, but then *BAM*

Showstopper. No problem with any other plugins.

Edit: This appears to be a possible conflict between my multi-monitor utility and Jamstix not wanting to play nice. Switched to Ultramon for now.