Rayzoon Technologies LLC

Sparky

I've followed the instructions to the letter but on some kits:

Funk->Jamstix2 -Funk
Rock->Metal

I'm hearing only the kick.

I reinstalled the stock kit per the instructions but this didn't help.

In the rzdlog I am seeing some error messages:

<110.9> WaveStore Loader Thread Started [31] With Priority 1
<111.0> BUF #8547 GEN ERROR [42] Gen PAB Stage 5 ITR 512 L 512 SP:12515 Status: MSG: Access violation at address 0B9E372B in module 'jamstix2.dll'. Read of address 00000020

....

<121.8> PPQ:139.73768707483 35:4:8 [14] Drum Gen Error: No wavedata!
<121.9> PPQ:140.039546485261 36:1:0 [0] Drum Gen Error: No wavedata!
<121.9> PPQ:140.039546485261 36:1:0 [0] Drum Gen Error: No wavedata!
<122.2> PPQ:140.503945578232 36:1:6 [2] Drum Gen Error: No wavedata!
<122.2> PPQ:140.527165532881 36:1:6 [2] Drum Gen Error: No wavedata!
<122.4> PPQ:141.038004535148 36:2:0 [4] Drum Gen Error: No wavedata!
<122.4> PPQ:141.038004535148 36:2:0 [4] Drum Gen Error: No wavedata!
<122.7> PPQ:141.525623582768 36:2:6 [6] Drum Gen Error: No wavedata!
<122.9> PPQ:142.036462585036 36:3:0 [8] Drum Gen Error: No wavedata!
<122.9> PPQ:142.036462585036 36:3:0 [8] Drum Gen Error: No wavedata!
<123.2> PPQ:142.524081632655 36:3:6 [10] Drum Gen Error: No wavedata!
<123.4> PPQ:143.034920634923 36:4:0 [12] Drum Gen Error: No wavedata!
<123.4> PPQ:143.034920634923 36:4:0 [12] Drum Gen Error: No wavedata!
<123.7> PPQ:143.522539682542 36:4:6 [14] Drum Gen Error: No wavedata!
<123.9> PPQ:144.03337868481 37:1:0 [0] Drum Gen Error: No wavedata!
<124.2> PPQ:144.520997732429 37:1:6 [2] Drum Gen Error: No wavedata!
<124.4> PPQ:145.031836734697 37:2:0 [4] Drum Gen Error: No wavedata!
<124.7> PPQ:145.519455782317 37:2:6 [6] Drum Gen Error: No wavedata!
<124.9> PPQ:146.030294784584 37:3:0 [8] Drum Gen Error: No wavedata!
<125.2> PPQ:146.517913832204 37:3:6 [10] Drum Gen Error: No wavedata!
<125.4> PPQ:147.028752834472 37:4:0 [12] Drum Gen Error: No wavedata!

This is with Reaper 2.103

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

Those kits are multi output kits. Make sure to set-up REAPER to support those outputs. If you still have this problem with proper output routing in REAPER then please send me the rzdlog.txt file.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

Sparky · Posted: Thu Feb 07, 2008 9:48 pm Post subject:

Yes, this did allow the full kit to be heard.

In the Kit window, I had selected:
"Set Output Routing -1- Single output"

I notice in the above window, nothing stays checked
after selecting. Is this because I've selected
"Stereo Audio Outputs" in the options window?

I assumed this would "mix" everything down to a stereo pair,
but clearly it doesn't work this way.

But i did notice once a kit has been loaded, the multi output
status is reflected in the Mixer window.

Thanks!

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332