Rayzoon Technologies LLC Forum Index Rayzoon Technologies LLC
Official Online Community & Support
 
Rayzoon Web Site

 FAQFAQ   SearchSearch   http://rayzoon.com/v-web/bulletin/bb/lm.phpMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Jamstix Arranger issue with Sonar V-PE/BFD- V1.61

 
Post new topic   Reply to topic    Rayzoon Technologies LLC Forum Index -> Jamstix - Support
View previous topic :: View next topic  
Author Message
Dragonlips
Jam Meister
Jam Meister


Joined: 26 May 2006
Posts: 52

PostPosted: Wed Jun 14, 2006 9:53 am    Post subject: Jamstix Arranger issue with Sonar V-PE/BFD- V1.61 Reply with quote

I have an interesting thing going on within my project. Since I'm new to Jamstix, I was wondering what I'm missing.

I'm trying to use the arranger to organize my grooves within Jamstix. I'm using Sonar V PE/BFD All. I'm noticing that between several grooves transitions, there are fills that I cannot remove from the arranger. I'm noticing Jamstix is putting a fill at the end of a groove, and at the first bar of the different groove. (two yellow boxes together). Well, I don't want 2 fills together like this. Normally I would just highlight the bar, move over the fill area and deselect the box so that no fill plays. Jamstix is not allowing me to do that. I highlight the bar, go over to the fill, and when I go to deselect the fill, Jamstix changes the fill to another fill - rather than remove it.

What am I doing wrong here!? Jamstix is preventing me from removing fills?! Is there another way to do this!? Please advise.
_________________
Metal Born Again:
http://www.soundclick.com/bands/pageartist.cfm?bandID=372370
Back to top
View user's profile Send private message
Ralph [RZ]
Site Admin
Site Admin


Joined: 02 Jan 2008
Posts: 13332

PostPosted: Wed Jun 14, 2006 10:24 am    Post subject: Reply with quote

Go to the arranger, right-click on the fill and click "Reset'. That will remove the fill.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com
Back to top
View user's profile Send private message Send e-mail
Dragonlips
Jam Meister
Jam Meister


Joined: 26 May 2006
Posts: 52

PostPosted: Thu Jun 15, 2006 7:59 pm    Post subject: Reply with quote

Zauni wrote:
Go to the arranger, right-click on the fill and click "Reset'. That will remove the fill.


I've done that, but when I remove the fill and playback the track, Jamstix seems to put that darn fill right back in there again automatically. What am I missing. It's like it has a mind of its own here. Please help! I have "use arrangement" checked
_________________
Metal Born Again:
http://www.soundclick.com/bands/pageartist.cfm?bandID=372370
Back to top
View user's profile Send private message
Ralph [RZ]
Site Admin
Site Admin


Joined: 02 Jan 2008
Posts: 13332

PostPosted: Thu Jun 15, 2006 8:16 pm    Post subject: Reply with quote

Make sure you are in "Manual Jam" mode when you override fills. In "Free Jam" mode, Jamstix does indeed have a mind of its own Smile
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com
Back to top
View user's profile Send private message Send e-mail
Dragonlips
Jam Meister
Jam Meister


Joined: 26 May 2006
Posts: 52

PostPosted: Thu Jun 15, 2006 8:20 pm    Post subject: Reply with quote

I wasn't aware I was in any "Jam mode" when I'm using the arranger. Sorry, I'm new to this - please excuse the ignorance.

So, put it in manual Jam. now will this change all other settings??
_________________
Metal Born Again:
http://www.soundclick.com/bands/pageartist.cfm?bandID=372370
Back to top
View user's profile Send private message
Ralph [RZ]
Site Admin
Site Admin


Joined: 02 Jan 2008
Posts: 13332

PostPosted: Thu Jun 15, 2006 8:37 pm    Post subject: Reply with quote

Dragonlips wrote:
I wasn't aware I was in any "Jam mode" when I'm using the arranger. Sorry, I'm new to this - please excuse the ignorance.

I'm here to help, so ask away any way you like.

Quote:

So, put it in manual Jam. now will this change all other settings??

The concept is like this:

You start off in 'free jam' and Jamstix does its thing, creating rhythms, changing them and putting fills. All of this is controlled by the jam tab settings.

Then you get to the point of fine-tuning and you set JS to 'manual jam'. The arrangement stays the same, nothing changes. You can now fine-tune things like rhythms, changes and fills in the arranger.

As a side note: some people never use 'free jam' and always operate JS in 'manual jam' mode, using library rhythms or their own creations, arranging them by hand and then placing fills as needed.

In other words: many different approaches are possible.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Rayzoon Technologies LLC Forum Index -> Jamstix - Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group