Rayzoon Technologies LLC

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

C:\Program Files (x86)\VstPlugIns\jamstix2\data\sounds\js2.ini

Note that the file modified date is 3/4/2008

[Volume Scaling]
Snare - 13'' JS2 Craviotto CS=35
Snare - 13'' JS2 Craviotto=35
Snare Bounce - 13'' JS2 Craviotto CS=35
Snare Bounce - 13'' JS2 Craviotto=35
Snare Rimshot - 13'' JS2 Craviotto CS=35
Snare Rimshot - 13'' JS2 Craviotto=35
Snare Sidestick - 13'' JS2 Craviotto CS=35
Snare Sidestick - 13'' JS2 Craviotto=35
Kick - JS2 Extra Dry=55
Kick - JS2 Standard=55
Kick - JS2 Standard CS=55

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

That's all quite odd. The file should have more entries after the 2.2.1 updater runs. Please do this:

- delete the file js2.ini from \data\sounds
- run the 2.2.1 updater again
- see if js2.ini is back and with more entries
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

Deleted the js2.ini from data\sounds. Updated again.

Now the original error is still present, but there are more entries in the js2.ini file:

[Volume Scaling]
Snare - 13'' JS2 Craviotto CS=35
Snare - 13'' JS2 Craviotto=35
Snare Bounce - 13'' JS2 Craviotto CS=35
Snare Bounce - 13'' JS2 Craviotto=35
Snare Rimshot - 13'' JS2 Craviotto CS=35
Snare Rimshot - 13'' JS2 Craviotto=35
Snare Sidestick - 13'' JS2 Craviotto CS=35
Snare Sidestick - 13'' JS2 Craviotto=35
Kick - JS2 Extra Dry=55
Kick - JS2 Standard=55
Kick - JS2 Standard CS=55

Snare - 14'' Supraphonic BoP=75
Snare - 14'' Supraphonic BoP CS=75
Snare Bounce - 14'' Supraphonic BoP=75
Snare Bounce - 14'' Supraphonic BoP CS=75
Snare Rimshot - 14'' Supraphonic BoP=75
Snare Rimshot - 14'' Supraphonic BoP CS=75
Snare Sidestick - 14'' Supraphonic BoP=35
Snare Sidestick - 14'' Supraphonic BoP CS=35

Snare - 14'' Supraphonic BoP No Wires=75
Snare - 14'' Supraphonic BoP No Wires CS=75

Kick - 26'' Ludwig Maple BoP=55
Kick - 26'' Ludwig Maple BoP CS=55

Kick - 26'' Ludwig Maple BoP Full=25
Kick - 26'' Ludwig Maple BoP Full CS=25

Kick - 26'' Ludwig Maple BoP Mallet=25
Kick - 26'' Ludwig Maple BoP Mallet CS=25

Kick - 26'' Ludwig Maple BoP Dry=25

HiHat Closed - 15'' 2002 SoundEdge BoP=10
HiHat Closed - 15'' 2002 SoundEdge BoP CS=10
HiHat 25pct - 15'' 2002 SoundEdge BoP=15
HiHat 25pct - 15'' 2002 SoundEdge BoP CS=15
HiHat 75pct - 15'' 2002 SoundEdge BoP=15
HiHat 75pct - 15'' 2002 SoundEdge BoP CS=15
HiHat Half Open - 15'' 2002 SoundEdge BoP=15
HiHat Half Open - 15'' 2002 SoundEdge BoP CS=15
HiHat Open - 15'' 2002 SoundEdge BoP=15
HiHat Open - 15'' 2002 SoundEdge BoP CS=15
HiHat Foot - 15'' 2002 SoundEdge BoP=15
HiHat Foot - 15'' 2002 SoundEdge BoP CS=15
HiHat Foot Splash - 15'' 2002 SoundEdge BoP=35
HiHat Foot Splash - 15'' 2002 SoundEdge BoP CS=35

HiHat Closed - 15'' 2002 SoundEdge BoP Mallet=20
HiHat Closed - 15'' 2002 SoundEdge BoP Mallet CS=20
HiHat Half Open - 15'' 2002 SoundEdge BoP Mallet=15
HiHat Half Open - 15'' 2002 SoundEdge BoP Mallet CS=15
HiHat Open - 15'' 2002 SoundEdge BoP Mallet=15
HiHat Open - 15'' 2002 SoundEdge BoP Mallet CS=15

Tom - 14'' Ludwig Maple BoP=75
Tom - 14'' Ludwig Maple BoP CS=75
Tom - 16'' Ludwig Maple BoP=75
Tom - 16'' Ludwig Maple BoP CS=75
Tom - 18'' Ludwig Maple BoP=75
Tom - 18'' Ludwig Maple BoP CS=75

Ride - 24'' 2002 Medium BoP=75
Ride - 24'' 2002 Medium BoP CS=75

Tom - 14'' Ludwig Maple BoP Mallet=75
Tom - 14'' Ludwig Maple BoP Mallet CS=75
Tom - 16'' Ludwig Maple BoP Mallet=75
Tom - 16'' Ludwig Maple BoP Mallet CS=75
Tom - 18'' Ludwig Maple BoP Mallet=75
Tom - 18'' Ludwig Maple BoP Mallet CS=75

Ride Bell Shank - 24'' 2002 Medium BoP=75
Ride Bell Shank - 24'' 2002 Medium BoP CS=75

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

I'd like to completely start from scratch.

How can I be absolutely sure all entries are gone from the registry and all file locations on C: ?

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

You're still getting the 'You need to run the latest Jamstix updater..' message?
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

Yes.

It occurs to me it might be an issue with captured settings in my Reaper cache. Is that possible?

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

Uninstalled the program completely using add/remove programs.

Loaded Reaper, reinitialized its cache. Shut it down.

Installed 2.0 and the stock kits. Should have been 200MB+, data folder is only 19MB, none of those files landed in the right place.

So whatever is wrong persists beyond uninstallation.

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

New wrinkle.

Uninstalled Reaper, Jamstix 2. Reinstalled both.

While Jamstix is 2.0.0 it loads, and the rdzlog.txt is created.

<0.0> 4/22/2008 2:18:05 PM
<0.0> Jamstix 2 2.0.0
<0.0> Host: REAPER
<0.0> Data: C:\Program Files (x86)\VstPlugIns\jamstix2\data
<0.0> BlockSize: 1024
<0.0> SampleRate: 44100
<0.0> Bar Offset: 0
<0.0> Output Latency: 0
<0.0> Input Latency: 0
<0.0> Outputs: 8
<0.0> Total RAM: 3078MB
<0.0> Free RAM: 1215MB
<0.0> audioM8 Mapping
<0.0> creating WaveStore
<0.0> creating Editor
<0.1> Preparing host data
<0.1> Loading Data From Host...
<0.1> Preparing Data Block [261164]
<0.2> Loading song data
<0.4> Loading mixer data
<0.4> Loading wavestore data
<0.4> Loading kit data
<6.7> Load Finished
<6.8> GUI Request
<6.8> GUI CREATION
<7.2> GUI Init Started
<10.3> GUI Initialized
<10.3> Preparing host data
<39.8> Preparing host data

After the 2.2.1 update is run, there is NO new rzdlog.txt created and the error message returns.

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

Please uninstall JS2 again and then re-download and execute the plugin installer from your download page (I have just renewed your links). This is a full installer and it is 2.2.1 already. Let me know if you have any problems after that.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

Thanks for the new installer, but I've tried every combination of uninstalling and relocating that I can think of. No dice.

Interestingly enough, I did get to a point where I didn't get the message, but no kits were installed yet. Then I installed the Jamstix 2 stock kit, but the data folder only grew to 40MB, yet the rxp2 file is 90+. Then the message returned.

The js2.ini file shrunk back to that 12 line version I posted above.

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

We need to figure out why your kits are apparently not installing right. Please run the stock RXP2 again and then immediately send me the file rzdlog.txt so I can review the install process.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

I'll do that when I get home tonight - won't be until after 6:00 pm MST, though. Thank you for the assistance.

Petersko · Jammer Joined: 24 Apr 2007 Posts: 37

I've "installed" the stock kit.

No rzdlog.txt file is being created. I've searched all drives in my system and there are none bearing todays date.

Also, the filenames are not appearing in the bottom status bar, but I don't know if that is normal for 2.2.1.

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

Extremely weird. I'll have to e-mail you a special Build to get to the bottom of this.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com

Ralph [RZ] · Site Admin Joined: 02 Jan 2008 Posts: 13332

I have just sent you the test Build.
_________________
Ralph Zeuner
Rayzoon Technologies LLC
http://www.rayzoon.com